CanKun Packaging
REFERENCE SPECIFICATION — FOR A NEW SAMPLE
参考规格：用于新选型和打样讨论
Version: 2026-10-23 / detail-reference-v1

PVC and Coated Paper Hang Tags

REFERENCE SPECIFICATION · 参考规格

Reference specification for a new sample

These are proposed values for a NEW sample. They are not measurements of the photographs, a recovered order, a signed production sample or a test result. 

Existing evidence and its limits

Existing product descriptions and photograph observations remain above. The proposed dimensions, construction and packing below are not additional measured facts about those photographed samples.

Separate components

Reference option: clear PVC 0.3 mm thick, 50 × 70 mm; separate 300 g/m² coated-paper information card 50 × 90 mm. Paper g/m² and PVC mm are different measurements; the sample must identify each component.

Print and assembly

Propose white screen-printed PVC branding and CMYK paper information, with a 3 × 250 mm polyester velvet ribbon. Trial an 8 × 2 mm slot, upper edge 5 mm from top, separately on both components. Review print adhesion, edge finish and the assembled reference; no resistance result is claimed.

Record the final drawing, artwork revision, component quantities, actual physical sample and approval before bulk production. Garment composition/care content, performance results and approver/date must come from the actual project.

This is not a measurement of an existing photograph, recovered historical order or approved production sample. Final dimensions, material, artwork and physical sample are approved for the actual project.
Sampling normally takes around 3 days after artwork and specification review. Bulk production is usually 7–15 days after physical sample and specification approval; shipping is separate.
Project enquiry: https://cannkun.com/contact/

Research basis for the proposed 0.3 mm PVC thickness only (not CanKun production evidence): https://www.gooinpack.com/product/frostedclear-pvc-branding-hang-tags
Slot, ribbon length, card dimensions and printing arrangement are planning assumptions for this example.