Woven Labels for Kidswear

Project Brief: Woven Labels for Kidswear

For example, kidswear collections often involve several garment sizes and changing size text alongside a consistent brand mark. Therefore, prepare the label version list and installation references before reviewing a quote.

Request a quote for woven labels for kidswear. If needed, you can edit the product, application and related-page reference in the inquiry form.

Build a size-to-label version list

First, list each garment style, size and the exact wording that should appear on its branding label. Next, separate a common logo label from size-specific versions where appropriate. Also, give quantities for each version and identify which artwork revision applies, so the order does not rely on a single undivided total. Therefore, check the version totals before approval.

Check placement on representative garment sizes

Then provide the proposed seam location and visible label area. Next, review trial installations on the relevant sizes, checking that stitching does not hide the logo or size text. For example, a layout that fits one sample garment may need a different placement review on another size.

Approve the visual reference and assembly

Next, compare spelling, size wording, logo proportions and color reference at actual label size. Then inspect exposed edges and the installed label, then record the accepted artwork and sample identifier. Also, supply any special material or testing requirement with evidence for that project.

Plan receiving and collection changes

Finally, request an agreed method for distinguishing label versions in the delivery. Then compare received versions with the approved style-size list before garment assembly. In addition, when updating a seasonal collection, state which references repeat and which size, logo or text versions change; retain the approved list for reorders.

For general woven-label options, see our custom woven labels category. Also, use the label repeat-order checklist to retain the approved reference and the care-label production guide when preparing separate care information.

However, the published MOQ and time estimates below are a starting point. Confirm quantities per artwork version and the final specification before agreeing the sample and production schedule; they are not guaranteed dispatch or arrival dates.

Custom woven label. Contact us for customization and quotation.

Frequently Asked Questions About Custom Woven Labels

What are these custom woven labels used for?

For example, they provide sewn-in brand identification for apparel, accessories, bags and footwear.

Can the label text, logo and layout be customized?

Yes. We can customize text, logo and artwork. First, we review the specification and artwork with you, then confirm the final layout.

What is the minimum order quantity (MOQ)?

MOQ starts at 100 pieces. However, confirm the final minimum for your specification and version quantities. Therefore, supply the version list with your quote request.

How long does sampling take?

Sampling normally takes around 3 days after specification and artwork review. Therefore, confirm the sample schedule against your final brief.

How long does bulk production take?

After physical sample and specification approval, bulk production usually takes 7–15 days depending on the final specification and order quantity. However, shipping time is separate.

How is the final material and care content confirmed?

We confirm material and recyclability with you based on the final selected material and finished combination. Also, confirm care content at that stage.

Need a project-specific quote? Reach us through our contact page, review the custom clothing labels FAQ, and see the custom care labels production guide.

REFERENCE SPECIFICATION · 参考规格

Reference specification for a new sample

These are proposed values for a NEW sample. They are not measurements of the photographs, a recovered order, a signed production sample or a test result.

Existing evidence and its limits

Existing product descriptions and photograph observations remain above. The proposed dimensions, construction and packing below are not additional measured facts about those photographed samples.

Construction and dimensions

Reference option: 50D polyester fine Damask, non-metallic polyester colour yarns; visible face 60 × 20 mm, 7 mm end fold at each short side, flat cut size 74 × 20 mm. Colours and this construction are new design choices.

Artwork and attachment

Start with text 2.5 mm high and strokes 0.4 mm, with artwork 5 mm inside the visible edges. Trial stitch placement 2 mm inside each visible short edge. Confirm lettering, folds, edges and attachment on the physical garment sample.

Application-specific review

Map each size text to the actual kidswear style. No age, body measurement or international size conversion is inferred.

Download the separate size-label reference (TXT)

Optional separate size-label reference

Proposed polyester woven loop-fold size label: folded 11 × 11 mm; flat 11 × 22 mm. Trial a 3 mm sewing zone at the open ends, leaving approximately 11 × 8 mm visible. XS/S/M/L/XL: 100 pieces each, total 500 pieces; 50 pieces per bag, two bags per size, ten bags total. These are a new sampling/allocation example, not a per-size MOQ promise or historical order quantities.

Review the category reference option · Download the reference specification (TXT) · Size allocation and packing example

Record the final drawing, artwork revision, component quantities, actual physical sample and approval before bulk production. Garment composition/care content, performance results and approver/date must come from the actual project.

Planning a Canadian-destination order? Use the Canadian specification review and physical-sample approval checklist, then include flat and visible dimensions, fold/seam allowances and logo artwork revision in your woven-label quote request. Identify Canada as the destination and keep the approved content, drawing and sample revision together.