Custom Woven Labels for Swimwear

Project Brief: Custom Woven Labels for Swimwear

For clarity, a swimwear branding label needs a brief that separates visual identity, installation and the intended use environment. However, this application page does not establish water exposure or colorfastness performance.

Request a quote for custom woven labels for swimwear. If needed, you can edit the product, application and related-page reference in the inquiry form.

Describe the intended use and label position

First, identify the swimwear style and intended sewing position, including the visible face, concealed allowance and dimensions available. Next, state the use conditions your buyer expects the finished garment to encounter. Identify which conditions the sample review must address.

Specify evidence needed for exposure claims

If pool-water, salt-water, laundering or color-transfer performance matters to the project, provide the required assessment conditions and acceptance criteria. Then request results applicable to the selected label construction. Therefore, do not infer chlorine resistance, colorfastness or a certified material from a photo or product title.

Inspect an installed sample

Next, review the label after your team attaches it to the intended garment construction. In particular, check edge contact, folding, lettering and how the logo sits in the approved position. In addition, where the buyer requires use or care checks, record the conditions and observations alongside the sample and artwork revision.

Keep care content and replenishment controlled

Also, submit the garment composition and care-information brief separately from the woven logo artwork. Next, list quantities by style and label version, then retain the approved assembled reference. For replenishment, confirm whether you need the same construction and artwork or whether a change needs a new review.

For general woven-label options, see our custom woven labels category. Also, use the label repeat-order checklist to retain the approved reference and the care-label production guide when preparing separate care information.

However, the published MOQ and time estimates below are a starting point. Confirm quantities per artwork version and the final specification before agreeing the sample and production schedule; they are not guaranteed dispatch or arrival dates.

Custom woven label. Contact us for customization and quotation.

Frequently Asked Questions About Custom Woven Labels

What are these custom woven labels used for?

For example, they provide sewn-in brand identification for apparel, accessories, bags and footwear.

Can the label text, logo and layout be customized?

Yes. We can customize text, logo and artwork. First, we review the specification and artwork with you, then confirm the final layout.

What is the minimum order quantity (MOQ)?

MOQ starts at 100 pieces. However, confirm the final minimum for your specification and version quantities.

How long does sampling take?

Sampling normally takes around 3 days after specification and artwork review. Therefore, confirm the sample schedule against your final brief.

How long does bulk production take?

After physical sample and specification approval, bulk production usually takes 7–15 days depending on the final specification and order quantity. However, shipping time is separate.

How is the final material and care content confirmed?

We confirm material and recyclability with you based on the final selected material and finished combination. Also, confirm care content at that stage.

Need a project-specific quote? Reach us through our contact page, review the custom clothing labels FAQ, and see the custom care labels production guide.

REFERENCE SPECIFICATION · 参考规格

Reference specification for a new sample

These are proposed values for a NEW sample. They are not measurements of the photographs, a recovered order, a signed production sample or a test result.

Existing evidence and its limits

Existing product descriptions and photograph observations remain above. The proposed dimensions, construction and packing below are not additional measured facts about those photographed samples.

Construction and dimensions

Reference option: 50D polyester fine Damask, non-metallic polyester colour yarns; visible face 60 × 20 mm, 7 mm end fold at each short side, flat cut size 74 × 20 mm. Colours and this construction are new design choices.

Artwork and attachment

Start with text 2.5 mm high and strokes 0.4 mm, with artwork 5 mm inside the visible edges. Trial stitch placement 2 mm inside each visible short edge. Confirm lettering, folds, edges and attachment on the physical garment sample.

Application-specific review

Review attachment on the intended swimwear fabric and exposure conditions. No chlorine, salt-water or colourfastness result is inferred.

Review the category reference option · Download the reference specification (TXT) · Size allocation and packing example

Record the final drawing, artwork revision, component quantities, actual physical sample and approval before bulk production. Garment composition/care content, performance results and approver/date must come from the actual project.

Planning a Canadian-destination order? Use the Canadian specification review and physical-sample approval checklist, then include flat and visible dimensions, fold/seam allowances and logo artwork revision in your woven-label quote request. Identify Canada as the destination and keep the approved content, drawing and sample revision together.