Sew-In Labels for Baby Clothing

Project Brief: Sew-In Labels for Baby Clothing

First, prepare a sew-in branding label brief around the actual garment construction and intended label position. However, this buying checklist does not establish infant-safety certification or a verified material specification.

Request a quote for sew-in labels for baby clothing. If needed, you can edit the product, application and related-page reference in the inquiry form.

Show where the label will sit

First, share the garment style and a photo or drawing of the proposed seam. Next, identify which label face and edges remain exposed, the space available and the allowance captured by stitching. In addition, where several garment sizes use the same branding, check the placement on each relevant size.

Keep branding and garment information separate

For example, clarify whether the woven label is for a logo, size identification or another approved text version. Also, if the garment needs composition and care information, provide that as a separate label brief. However, do not assume a branding label alone covers the information required for the finished garment.

Review an installed sample

Next, ask for the proposed label specification. Then inspect the sample after your team sews it into the intended construction. In particular, review edge placement, folded corners, stitch capture and any contact with the garment wearer. Finally, record requested revisions before approving the reference for production.

Request evidence for any special requirement

If your project specifies a material restriction, test, certificate or buyer acceptance criterion, supply the exact requirement and request evidence applicable to the selected label. However, a product name or reference image is not proof of compliance. Therefore, keep the accepted reference and version list with the order.

For general woven-label options, see our custom woven labels category. Also, use the label repeat-order checklist to retain the approved reference and the care-label production guide when preparing separate care information.

However, the published MOQ and time estimates below are a starting point. Confirm quantities per artwork version and the final specification before agreeing the sample and production schedule; they are not guaranteed dispatch or arrival dates.

Custom woven label. Contact us for customization and quotation.

Frequently Asked Questions About Custom Woven Labels

What are these custom woven labels used for?

For example, they provide sewn-in brand identification for apparel, accessories, bags and footwear.

Can the label text, logo and layout be customized?

Yes. For example, we can customize text, logo and artwork. First, we review the specification and artwork with you, then confirm the final layout.

What is the minimum order quantity (MOQ)?

MOQ starts at 100 pieces. However, confirm the final minimum for your specification and version quantities.

How long does sampling take?

Sampling normally takes around 3 days after specification and artwork review. Therefore, confirm the sample schedule against your final brief.

How long does bulk production take?

After physical sample and specification approval, bulk production usually takes 7–15 days depending on the final specification and order quantity. However, shipping time is separate.

How is the final material and care content confirmed?

We confirm material and recyclability with you based on the final selected material and finished combination. Also, confirm care content at that stage.

Need a project-specific quote? Reach us through our contact page, review the custom clothing labels FAQ, and see the custom care labels production guide.

REFERENCE SPECIFICATION · 参考规格

Reference specification for a new sample

These are proposed values for a NEW sample. They are not measurements of the photographs, a recovered order, a signed production sample or a test result.

Existing evidence and its limits

Existing product descriptions and photograph observations remain above. The proposed dimensions, construction and packing below are not additional measured facts about those photographed samples.

Construction and dimensions

Reference option: 50D polyester fine Damask, non-metallic polyester colour yarns; visible face 60 × 20 mm, 7 mm end fold at each short side, flat cut size 74 × 20 mm. Colours and this construction are new design choices.

Artwork and attachment

Start with text 2.5 mm high and strokes 0.4 mm, with artwork 5 mm inside the visible edges. Trial stitch placement 2 mm inside each visible short edge. Confirm lettering, folds, edges and attachment on the physical garment sample.

Application-specific review

Review the installed seam, exposed edges and handling on the intended baby garment. This proposal is not infant-safety or skin-contact certification.

Download the separate size-label reference (TXT)

Optional separate size-label reference

Proposed polyester woven loop-fold size label: folded 11 × 11 mm; flat 11 × 22 mm. Trial a 3 mm sewing zone at the open ends, leaving approximately 11 × 8 mm visible. XS/S/M/L/XL: 100 pieces each, total 500 pieces; 50 pieces per bag, two bags per size, ten bags total. These are a new sampling/allocation example, not a per-size MOQ promise or historical order quantities.

Review the category reference option · Download the reference specification (TXT) · Size allocation and packing example

Record the final drawing, artwork revision, component quantities, actual physical sample and approval before bulk production. Garment composition/care content, performance results and approver/date must come from the actual project.

Planning a Canadian-destination order? Use the Canadian specification review and physical-sample approval checklist, then include flat and visible dimensions, fold/seam allowances and logo artwork revision in your woven-label quote request. Identify Canada as the destination and keep the approved content, drawing and sample revision together.